Configure Joystick

Certain integrated systems allow for Joystick controls. To use a Joystick, you will first need to Configure its settings in Designer.

To Configure a Joystick, follow the steps below.

  1. In Project Explorer, right-click the Integrated System and click Configure.
  2. Click Configure Joystick.
  3. Configure the below settings.
    Connect Joystick Check this box to allow Runtime to connect to the Joystick.
    Dead Zone % The Dead Zone is an area in the Joystick which does not respond to movement. Setting a value for this will assist in keeping the Joystick from registering movement from the Dead Zone when it should not.
    Default Horizontal Speed How quickly the device will move Horizontally by default. A lower value is slower — higher is faster.
    Default Vertical Speed How quickly the device will move Vertically by default. A lower value is slower — higher is faster.
    Default Rotation Speed How quickly the device will Rotate by default. A lower value is slower — higher is faster.
    Invert X Check this to move the device in the opposite direction on the X axis.
    Invert Y Check this to move the device in the opposite direction on the Y axis.
    Invert Z Check this to zoom the opposite way.