Spectralink Wi-Fi Phones
The Spectralink Wi-Fi Phones integrated system provides message sending and receiving services into IPFusion.
Setup
See the Data Servers page for information on configuring driver communication.
Compatibility
The Spectralink Wi-Fi Phones integrated system is compatible with Spectralink 84 Series Phones.
Prerequisites
| Software | Minimum Version |
|---|---|
| IPFusion — Spectralink Wi-Fi Phones | 1.1 |
| .NET Framework | 4.7.2 |
When completing your setup, be sure to have the Spectralink documentation available for reference.
Ports
These ports must be open in your network firewall for the integration to work.
| Purpose | Default Value | Configurable |
|---|---|---|
| SpectraLink Connection | 80 | No |
| Dataserver | 9524 | Yes |
| Debug Tools | 9573 | No |
Assets
Phone
This asset represents a Spectralink 84 Series phone.
Supported States
| Normal | The asset is online and in its default state. |
| Fault | An issue has been detected in a connected asset. |
| Masked | The asset has been masked over its true state. |
| Acknowledged | An asset alarm has been acknowledged. |
| No Communication | Communication has been lost with the driver or asset. This status can
also occur if the communication configuration for the system or asset is
invalid. Note: This status is required in all status
tables.
|
| Notified | The asset has received a notification. |
See the Configure a Status Table page for more information on configuring status tables.
Supported Commands
| Mask | Mask the asset's true state. |
| Acknowledge | Acknowledge an asset alarm. |
| Reset | Resets the asset to its true hardware state. |
| Cancel | Deselects all selected assets. |
| New Note | Adding the New Note Command to your Command Table subscribes this asset to Notes, allowing an operator to attach Notes to this asset in Runtime. |
| Workflow Trigger | Allows users to trigger Workflows to create custom commands. |
See the Command Tables page for more information on configuring command tables.
Workflow Integration
System Commands
System commands are commands executed through Workflows at the system level. For more information about Workflows, see the Workflows section.
Send Message
Sends a message to a phone.
| Asset ID | The asset ID of the phone asset the message will be sent to. |
| Description | The body of the message being sent. Note: This must be
surrounded by quotation marks (""). |
| Priority | The priority of the message from 1 (lowest) to 8 (highest). |
| Callback Number | The phone number any responses to this message are sent
to. Note: This must be surrounded by quotation
marks (""). |
| Location | The asset ID of the phone this message is being sent
to. Note: This must be surrounded by quotation marks
(""). |
Troubleshooting
Logs from the driver and Runtime can be viewed in the Debug Tools client. These messages contain information which can provide further context for issues during initialization, or while actively running. This can help diagnose problems.