Eaton Fifth Light

Setup

See the Data Servers page for information on configuring driver communication.

Compatibility

The Eaton Fifth Light integrated system is compatible:

Product Model Number FLT-BACNET
Application Software Version: LMS 4.12.4
BACnet Protocol Revision: ANSI/ASHRAE standard 135-2204 BACnet revision 2

BACnet Object Types


Asset	Object
Light	ANALOG_OUTPUT
Lighting Zone	ANALOG_OUTPUT

Prerequisites


Software	Minimum Version
IPFusion — Eaton Fifth Light	1.0
.NET Framework	4.7.2

When completing your setup, be sure to have the Eaton Fifth Light documentation available for reference.

Ports

These ports must be open in your network firewall for the integration to work.


Purpose	Default Value	Configurable
Communication Settings	47808	Yes
Dataserver	9520	Yes
Debug Tools	9566	No

Communication Configuration

You will find the Communication Settings in the integrated system configuration panel. The following information is required:


IP Address	The IP Address of the Fifth Light BACnet gateway.
Port	The Port for the Fifth Light BACnet gateway connection.
Device ID	The Device ID of the Fifth Light BACnet gateway.
Override Priority	The Priority level of the command for the BACnet priority array. Values available: 1 — High Priority 2 — High Priority 8 — High Priority 11 — Normal Priority

Note: Red X indicates an invalid or out of range value given for field.

Assets

Light

This asset represents a single light device in the Eaton Fifth Light system.

Required Property Grid Fields


BACnet ID	The ID of the BACnet entity the asset represents.

View all properties

Supported States


Fault	An issue has been detected in a connected asset.
Acknowledged	An asset alarm has been acknowledged.
No Communication	Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid. Note: This status is required in all status tables.
On	For a single light, its power is set to 100%. For a group of lights, at least one light in the group is above 0%.
On and Override	The asset has been set to the On state from Runtime, and is overriding a light value set outside of Runtime.
Off	A single light, or all lights in a group, are set to 0% power.
Off and Override	The asset has been set to the Off state from the Runtime, and is overriding a light value set outside of Runtime.
Custom Range	The current power level of the light falls within the range specified in the status configuration. Lower Threshold — Lowest value of the power level of the light in a user-defined range. Upper Threshold — Highest value of the power level of the light in a user-defined range.
Custom Range and Override	The current power level of the light falls within the range specified in the status configuration, and is overriding a light value set outside of Runtime. Lower Threshold — Lowest value of the power level of the light in a user-defined range. Upper Threshold — Highest value of the power level of the light in a user-defined range.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Mask	Mask the asset's true state.
Acknowledge	Acknowledge an asset alarm.
Reset	Resets the asset to its true hardware state.
Cancel	Deselects all selected assets.
On	Sets the light to 100% power. Override Duration — Forcibly overriding the light value for a period of time from one minute to twenty-four hours.
Off	Sets light to 0% power. Override Duration — Forcibly overriding the light value for a period of time from one minute to twenty-four hours.
Percent Dim	Sets light to a specific power level. Light Level — The power level of the light from 0% to 100%. Override Duration — Forcibly overriding the light value for a period of time from one minute to twenty-four hours.
Cancel Override	Cancels the On, Off, or Percent Dim command last sent and sets the device to the previous power level.

See the Command Tables page for more information on configuring command tables.

Lighting Zone

Light zones are represented as predefined groups of lights configured using the Eaton Fifth Light proprietary software.

Required Property Grid Fields


BACnet ID	The ID of the BACnet entity the asset represents.

View all properties

Supported States


Fault	An issue has been detected in a connected asset.
Masked	The asset has been masked over its true state.
Acknowledged	An asset alarm has been acknowledged.
No Communication	Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid. Note: This status is required in all status tables.
On	For a single light, its power is set to 100%. For a group of lights, at least one light in the group is above 0%.
On and Override	The asset has been set to the On state from the Runtime, and is overriding a light value set outside of Runtime.
Off	A single light, or all lights in a group, are set to 0% power.
Off and Override	The asset has been set to the Off state from the Runtime, and is overriding a light value set outside of Runtime.
Custom Range	The current power level of the light falls within the range specified in the status configuration. Lower Threshold — Lowest value of the power level of the light in a user-defined range. Upper Threshold — Highest value of the power level of the light in a user-defined range.
Custom Range and Override	The current power level of the light falls within the range specified in the status configuration, and is overriding a light value set outside of Runtime. Lower Threshold — Lowest value of the power level of the light in a user-defined range. Upper Threshold — Highest value of the power level of the light in a user-defined range.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Mask	Mask the asset's true state.
Acknowledge	Acknowledge an asset alarm.
Reset	Resets the asset to its true hardware state.
Cancel	Deselects all selected assets.
On	Sets the light zone to 100% power. Override Duration — Forcibly overriding the light value for a period of time from one minute to twenty-four hours.
Off	Sets light zone to 0% power. Override Duration — Forcibly overriding the light value for a period of time from one minute to twenty-four hours.
Percent Dim	Sets light zone to a specific power level. Light Level — The power level of the light from 0% to 100%. Override Duration — Forcibly overriding the light value for a period of time from one minute to twenty-four hours.

See the Command Tables page for more information on configuring command tables.

System

This asset represents the connection from Runtime to the Eaton Fifth Light system.

View all properties

Supported States


Normal	The asset is online and in its default state.
Fault	An issue has been detected in a connected asset.
Masked	The asset has been masked over its true state.
Acknowledged	An asset alarm has been acknowledged.
No Communication	Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid. Note: This status is required in all status tables.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Mask	Mask the asset's true state.
Acknowledge	Acknowledge an asset alarm.
Reset	Resets the asset to its true hardware state.
Cancel	Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Workflow Integration

System Commands

System commands are commands executed through Workflows at the system level. For more information about Workflows, see the Workflows section.

Change Light Level

Sets light or lighting zone to a specific power level for a specified amount of time.

Table 1. Parameters
Asset ID	The unique identifier for the light to change.
Light Level	The power level for the light.
Duration	How long in minutes the light will be set to this level.

Troubleshooting

Unable to Connect to Assets

If you are having trouble connecting to the assets in your system, the BACnet objects may be configured with the incorrect type. Ensure your BACnet object is configured to use the correct object type.

Logs from the driver and Runtime can be viewed in the Debug Tools client. These messages contain information which can provide further context for issues during initialization, or while actively running. This can help diagnose problems.