Moxa IoLogik

Setup

See the Data Servers page for information on configuring driver communication.

Prerequisites


Software	Minimum Version
.Net Framework	4.7.2
IPFusion — Moxa IoLogik	1.2

When completing your setup, be sure to have the Moxa documentation available for reference.

Note: The Moxa IoLogik integrated system supports all Moxa 22XX devices.

Ports

These ports must be open in your network firewall for the integration to work.


Purpose	Default Value	Configurable
Device Asset	502	Yes
Dataserver	9644	Yes
Debug Tools	9645	No

Assets

Device

This asset represents a Moxa IoLogik device.

Required Property Grid Fields


Address	The address of the device to connect to.
Polling Rate	How frequently in milliseconds Runtime will poll the device for status.
Port	The port used to connect to the device.

View all properties

Supported States


Normal	The asset is online and in its default state.
Masked	The asset has been masked over its true state.
Fault	An issue has been detected in a connected asset.
Acknowledged	An asset alarm has been acknowledged.
No Communication	Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid. Note: This status is required in all status tables.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Mask	Mask the asset's true state.
Reset	Resets the asset to its true hardware state.
Acknowledge	Acknowledge an asset alarm.
Cancel	Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Input

This asset represents an input on the Moxa IoLogik device.

Required Property Grid Fields


Device	The device which this input is connected to.
Input	The ID of the input this asset represents.

View all properties

Supported States


On	The input is currently active.
Off	The input is currently inactive.
Masked	The asset has been masked over its true state.
Fault	An issue has been detected in a connected asset.
Acknowledged	An asset alarm has been acknowledged.
No Communication	Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid. Note: This status is required in all status tables.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Mask	Mask the asset's true state.
Reset	Resets the asset to its true hardware state.
Acknowledge	Acknowledge an asset alarm.
Cancel	Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Output

This asset represents an output on the Moxa IoLogik device.

Required Property Grid Fields


Device	The device which this output is connected to.
Output	The ID of the output this asset represents.

Supported States


On	The output is currently active.
Off	The output is currently inactive.
Masked	The asset has been masked over its true state.
Fault	An issue has been detected in a connected asset.
Acknowledged	An asset alarm has been acknowledged.
No Communication	Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid. Note: This status is required in all status tables.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Activate	Turn the output on.
Deactivate	Turn the output off.
Mask	Mask the asset's true state.
Reset	Resets the asset to its true hardware state.
Acknowledge	Acknowledge an asset alarm.
Cancel	Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Troubleshooting

Logs from the driver and Runtime can be viewed in the Debug Tools client. These messages contain information which can provide further context for issues during initialization, or while actively running. This can help diagnose problems.