ILC LightLEEDer
The ILC LightLEEDer integrated system provides individual control of lighting ballasts, drivers, and controls. The ILC LightLEEDer system is integrated into IPFusion by design. For further information about this integration, please contact support.
Setup
See the Data Servers page for information on configuring driver communication.
Compatibility
The ILC LightLEEDer integrated system is compatible with LightLEEDer programmable lighting control panels using the BACnet IP add-on module.
BACnet Object Types
| Asset | Object |
|---|---|
| Light | BACNET_APPLICATION_TAG_ENUMERATED |
| Light Zone | BACNET_APPLICATION_TAG_ENUMERATED |
Prerequisites
| Software | Minimum Version |
|---|---|
| IPFusion — ILC LightLEEDer | 1.0 |
| .NET Framework | 4.7.2 |
When completing your setup, be sure to have the ILC LightLEEDer documentation available for reference.
Ports
These ports must be open in your network firewall for the integration to work.
| Purpose | Default Value | Configurable |
|---|---|---|
| Communication Settings | 47808 | Yes |
| Dataserver | 9520 | Yes |
| Debug Tools | 9566 | No |
Communication Configuration
You will find the Communication Settings in the integrated system configuration panel. The following information is required:
| IP Address | The IP Address of the BACnet gateway. |
| Port | The Port for the BACnet gateway connection. |
| Device ID | The Device ID of the BACnet gateway. |
Assets
Light
This asset represents a single light device in the ILC LightLEEDer system.
Required Property Grid Fields
| BACnet ID | The ID of the BACnet entity the asset represents. |
Supported States
| Acknowledged | An asset alarm has been acknowledged. |
| Masked | The asset has been masked over its true state. |
| No Communication | Communication has been lost with the driver or asset. This status can
also occur if the communication configuration for the system or asset is
invalid. Note: This status is required in all status
tables.
|
| On | The light is turned on. |
| Off | The light is turned off. |
See the Configure a Status Table page for more information on configuring status tables.
Supported Commands
| Acknowledge | Acknowledge an asset alarm. |
| Cancel | Deselects all selected assets. |
| Mask | Mask the asset's true state. |
| On | Turns the light on. |
| Off | Turns the light off. |
| Reset | Resets the asset to its true hardware state. |
See the Command Tables page for more information on configuring command tables.
Light Zone
Light zones are represented as predefined groups of lights configured using the ILC LightLEEDer proprietary software.
Required Property Grid Fields
| BACnet ID | The ID of the BACnet entity the asset represents. |
Supported States
| Acknowledged | An asset alarm has been acknowledged. |
| Fault | An issue has been detected in a connected asset. |
| Masked | The asset has been masked over its true state. |
| No Communication | Communication has been lost with the driver or asset. This status can
also occur if the communication configuration for the system or asset is
invalid. Note: This status is required in all status
tables.
|
| On | The lighting zone is turned on. |
| Off | The lighting zone is turned off. |
See the Configure a Status Table page for more information on configuring status tables.
Supported Commands
| Acknowledge | Acknowledge an asset alarm. |
| Cancel | Deselects all selected assets. |
| Mask | Mask the asset's true state. |
| On | Turns on the light zone. |
| Off | Turns off the light zone. |
| Reset | Resets the asset to its true hardware state. |
See the Command Tables page for more information on configuring command tables.
System
This asset represents the connection from Runtime to the ILC LightLEEDer system.
Supported States
| Normal | The asset is online and in its default state. |
| Fault | An issue has been detected in a connected asset. |
| Masked | The asset has been masked over its true state. |
| Acknowledged | An asset alarm has been acknowledged. |
| No Communication | Communication has been lost with the driver or asset. This status can
also occur if the communication configuration for the system or asset is
invalid. Note: This status is required in all status
tables.
|
See the Configure a Status Table page for more information on configuring status tables.
Supported Commands
| Mask | Mask the asset's true state. |
| Acknowledge | Acknowledge an asset alarm. |
| Reset | Resets the asset to its true hardware state. |
| Cancel | Deselects all selected assets. |
See the Command Tables page for more information on configuring command tables.
Troubleshooting
Unable to Connect to Assets
If you are having trouble connecting to the assets in your system, the BACnet objects may be configured with the incorrect type. Ensure your BACnet object is configured to use the correct object type.
Logs from the driver and Runtime can be viewed in the Debug Tools client. These messages contain information which can provide further context for issues during initialization, or while actively running. This can help diagnose problems.