Southwest Microwave Intrepid Micropoint

The Southwest Microwave Intrepid integrated system provides fence monitoring integration into IPFusion.

Definitions

Southwest Microwave (SWM) — The Southwest Microwave Integrated System.

Open Platform Communications (OPC) — A set of standards used for the exchange of data.

Component Object Model (COM) — A standard that enables communications between software components.

Setup

See the Data Servers page for information on configuring driver communication.

Compatibility

The Southwest Microwave integrated system is compatible with Intrepid Micropoint.

Prerequisites

Software Minimum Version
.NET Framework 4.7.2

When completing your setup, be sure to have the Southwest Microwave documentation available for reference.

Ports

These ports must be open in your network firewall for the integration to work.

Purpose Default Value Configurable
Dataserver 8081 Yes
Debug Tools 9562 No

Communication Configuration

In the integrated system configuration panel, you will find the Communication Settings. The following information is required:

Connect COM Tag Name The Name of the COM Tag used to connect.
Disconnect COM Tag Name The Name of the COM Tag used to disconnect.
Connection Status Tag Name The name of the Tag associated with the Connection Status.
Retry connection from workstation The designated Workstation to trigger connect/reconnect.
Note: Red X indicates an invalid or out of range value given for field.

Assets

Note: The Default Tag Name set for each asset aligns with the current FRD for SWM Intrepid.

Cable Fault A Asset

Represents a Cable A Fault for a fence.

Required Property Grid Fields

Tag Name The Name of the OPC Tag associated with the Asset.
Tag Offset The Offset of the OPC info associated with the asset. Normal status is based on a reading of zero for the Offset configured for an asset. A reading of one (true) is an alarm. Transitioning to true triggers the In Alarm state.

View all properties

Supported States

Normal The asset is online and in its default state.
Fault An issue has been detected in a connected asset.
Masked The asset has been masked over its true state.
Acknowledged An asset alarm has been acknowledged.
No Communication Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid.
Note: This status is required in all status tables.
In Alarm The asset has entered an alarmed state.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands

Mask Mask the asset's true state.
Acknowledge Acknowledge an asset alarm.
Reset Resets the asset to its true hardware state.
Cancel Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Cable Fault B Asset

Represents a Cable B Fault for a fence.

Required Property Grid Fields

Tag Name The Name of the OPC Tag associated with the Asset.
Tag Offset The Offset of the OPC info associated with the asset. Normal status is based on a reading of zero for the Offset configured for an asset. A reading of one (true) is an alarm. Transitioning to true triggers the In Alarm state.

View all properties

Supported States

Normal The asset is online and in its default state.
Fault An issue has been detected in a connected asset.
Masked The asset has been masked over its true state.
Acknowledged An asset alarm has been acknowledged.
No Communication Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid.
Note: This status is required in all status tables.
In Alarm The asset has entered an alarmed state.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands

Mask Mask the asset's true state.
Acknowledge Acknowledge an asset alarm.
Reset Resets the asset to its true hardware state.
Cancel Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Connection Asset

Represents the Connection to the SWM Intrepid system.

View all properties

Supported States

Normal The asset is online and in its default state.
Fault An issue has been detected in a connected asset.
Masked The asset has been masked over its true state.
Acknowledged An asset alarm has been acknowledged.
No Communication Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid.
Note: This status is required in all status tables.
In Alarm The asset has entered an alarmed state.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands

Mask Mask the asset's true state.
Acknowledge Acknowledge an asset alarm.
Reset Resets the asset to its true hardware state.
Cancel Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Fence Asset

Represents a Fence within the SWM Intrepid system

Required Property Grid Fields

Tag Name The Name of the OPC Tag associated with the Asset.
Tag Offset The Offset of the OPC info associated with the asset. Normal status is based on a reading of zero for the Offset configured for an asset. A reading of one (true) is an alarm. Transitioning to true triggers the In Alarm state.

View all properties

Supported States

Normal The asset is online and in its default state.
Fault An issue has been detected in a connected asset.
Masked The asset has been masked over its true state.
Acknowledged An asset alarm has been acknowledged.
No Communication Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid.
Note: This status is required in all status tables.
In Alarm The asset has entered an alarmed state.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands

Mask Mask the asset's true state.
Acknowledge Acknowledge an asset alarm.
Reset Resets the asset to its true hardware state.
Cancel Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Processor Connection Asset

Represents the Connection to a Processor in the SWM system.

Required Property Grid Fields

Tag Name The Name of the OPC Tag associated with the Asset.
Tag Offset The Offset of the OPC info associated with the asset. Normal status is based on a reading of zero for the Offset configured for an asset. A reading of one (true) is an alarm. Transitioning to true triggers the In Alarm state.

View all properties

Supported States

Normal The asset is online and in its default state.
Fault An issue has been detected in a connected asset.
Masked The asset has been masked over its true state.
Acknowledged An asset alarm has been acknowledged.
No Communication Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid.
Note: This status is required in all status tables.
In Alarm The asset has entered an alarmed state.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands

Mask Mask the asset's true state.
Acknowledge Acknowledge an asset alarm.
Reset Resets the asset to its true hardware state.
Cancel Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Processor Tamper Asset

Represents a Tamper with a Processor in the SWM system.

Required Property Grid Fields

Tag Name The Name of the OPC Tag associated with the Asset.
Tag Offset The Offset of the OPC info associated with the asset. Normal status is based on a reading of zero for the Offset configured for an asset. A reading of one (true) is an alarm. Transitioning to true triggers the In Alarm state.

View all properties

Supported States

Normal The asset is online and in its default state.
Fault An issue has been detected in a connected asset.
Masked The asset has been masked over its true state.
Acknowledged An asset alarm has been acknowledged.
No Communication Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid.
Note: This status is required in all status tables.
In Alarm The asset has entered an alarmed state.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands

Mask Mask the asset's true state.
Acknowledge Acknowledge an asset alarm.
Reset Resets the asset to its true hardware state.
Cancel Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Troubleshooting

Logs from the driver and Runtime can be viewed in the Debug Tools client. These messages contain information which can provide further context for issues during initialization, or while actively running. This can help diagnose problems.