Tyco ExacqVision

Setup

See the Data Servers page for information on configuring driver communication.

Note: Asset Multi-Select is not available for this integrated system.

Compatibility

The Tyco ExacqVision integrated system is compatible with these versions for ExacqVision Enterprise:


Software	Version
Client	22.12.2 23.03.0
Server	22.12.5 23.03.3
Web Service	22.12.1 23.03.1

Prerequisites


Software	Minimum Version
IPFusion — Tyco ExacqVision	1.0
.NET Framework	4.7.2

Important: The Web Endpoint must be running on the ExacqVision server in order for the video and hardware sync to function.

When completing your setup, be sure to have the Tyco ExacqVision documentation available for reference.

Ports

These ports must be open in your network firewall for the integration to work.


Purpose	Default Value	Configurable
Tyco ExacqVision Server Connection	22609	Yes
Tyco ExacqVision Web Endpoint	80	No
Dataserver	9661	Yes
Debug Tools	9662	No

Communication Configuration

In the integrated system configuration panel, you will find the Communication Settings. The below information is required.


Address	The host name or IP address of the ExacqVision server.
Port	The port used for the connection to the ExacqVision server.
Username	The username of the user for the connection from Runtime to ExacqVision. Note: This field is case-sensitive.
Password	The password for the account used to connect to ExacqVision.

Note: Red X indicates an invalid or out of range value given for field.

Assets

Camera

The camera asset is designed to represent a camera in the ExacqVision system.

Required Property Grid Fields


ExacqVision ID	The identifier for this camera in the ExacqVision system.
Joystick Control	Check this option to enable PTZ controls via a joystick for this camera.

View all properties

Supported States


Normal	The asset is online and in its default state.
Fault	An issue has been detected in a connected asset.
Masked	The asset has been masked over its true state.
Acknowledged	An asset alarm has been acknowledged.
No Communication	Communication has been lost with the driver, camera, or ExacqVision server. Note: This status is required in all status tables.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Mask	Mask the asset's true state.
Acknowledge	Acknowledge an asset alarm.
Reset	Resets the asset to its true hardware state.
Cancel	Deselects all selected assets.

Table 1. For PTZ Capable Cameras
Name	Parameters	Description
PTZ Pan/Tilt	Pan Speed — How quickly the camera moves left or right. Set as 0 to keep it centered. Tilt Speed — How quickly the camera moves up or down. Set as 0 to keep it centered.	Moves the camera in a specified direction.
PTZ Zoom	Zoom Speed — How quickly the camera zooms in or out.	Zooms the camera in or out.
PTZ Stop		Stops any currently running PTZ commands on the camera.
PTZ Preset	Preset Number — The number for the PTZ command.	Uses a preset PTZ command.

See the Command Tables page for more information on configuring command tables.

System

This asset represents the connection to the ExacqVision system.

View all properties

Supported States


Acknowledged	An asset alarm has been acknowledged.
Fault	An issue has been detected in a connected asset.
Masked	The asset has been masked over its true state.
No Communication	Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid. Note: This status is required in all status tables.
Normal	The asset is online and in its default state.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Acknowledge	Acknowledge an asset alarm.
Cancel	Deselects all selected assets.
Mask	Mask the asset's true state.
Reset	Resets the asset to its true hardware state.

See the Command Tables page for more information on configuring command tables.

Workflow Integration

System Commands

System commands are commands executed through Workflows at the system level. For more information about Workflows, see the Workflows section.

Callup Live Camera to ExacqVision Monitor

Displays a camera stream to a specified monitor.

Table 2. Parameters
Camera Asset ID	The asset ID of the camera to display the video for.
Monitor ID	The Identifier of the ExacqVision monitor to display the video feed on.
Tile Number	The instance number of the ExacqVision pane to display in. E.g., if the instance name is COMPUTER20-2, this number will be 2. For more information on how to configure an ExacqVision monitor, see the Configure an ExacqVision Monitor section.

Create a Playback Bookmark

Creates a bookmark in the ExacqVision server.


Camera Asset ID	The ID of the camera asset to create the bookmark for.
Timestamp	The time for the recorded video to be bookmarked from.
Description	The description of the video being bookmarked.
Pre Time in Seconds	Number of seconds prior to the timestamp to be included in the bookmarked video.
Post Time in Seconds	Number of seconds after the timestamp to be included in the bookmarked video.

Trigger Camera Preset

Table 3. Parameters
Preset Number	The ID of the preset command. Note: This command only accepts positive integer values.
Camera Asset ID	The ID of the camera asset to execute the PTZ command on.

Troubleshooting

Logs from the driver and Runtime can be viewed in the Debug Tools client. These messages contain information which can provide further context for issues during initialization, or while actively running. This can help diagnose problems.