Pelco Endura

Setup

See the Data Servers page for information on configuring driver communication.

Note: Asset Multi-Select is not available for this integrated system.

Prerequisites


Software	Minimum Version
.NET Framework	4.7.2

When completing your setup, be sure to have the Pelco Endura documentation available for reference.

Communication Configuration

In the integrated system configuration panel, you will find the Communication Settings. The below information is required.


Command Tag	The name of the Tag in the database that is connected to the command tag for the Delco to Pelco OPC driver.
IP Address Tag	The name of the Tag in the database that is connected to the IP address tag of the driver. This is the IP address of the Pelco Endura server.
Use Serial Driver	Check when using the old version of the Delco to Pelco driver which uses a serial connection to the Pelco Matrix.

Note: Red X indicates an invalid or out of range value given for field.

Assets

Camera

This asset represents a camera in the Pelco Endura system.

Required Property Grid Fields


Device ID	The identifier for the camera entity.

View all properties

Supported States


Normal	The asset is online and in its default state.
Fault	An issue has been detected in a connected asset.
Masked	The asset has been masked over its true state.
Acknowledged	An asset alarm has been acknowledged.
No Communication	Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid. Note: This status is required in all status tables.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Mask	Mask the asset's true state.
Acknowledge	Acknowledge an asset alarm.
Reset	Resets the asset to its true hardware state.
Cancel	Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

System Asset

This asset represents the connection state of the system.

View all properties

Supported States


Normal	The asset is online and in its default state.
Masked	The asset has been masked over its true state.
Acknowledged	An asset alarm has been acknowledged.
No Communication	Communication has been lost with the driver or asset. This status can also occur if the communication configuration for the system or asset is invalid. Note: This status is required in all status tables.

See the Configure a Status Table page for more information on configuring status tables.

Supported Commands


Mask	Mask the asset's true state.
Acknowledge	Acknowledge an asset alarm.
Reset	Resets the asset to its true hardware state.
Cancel	Deselects all selected assets.

See the Command Tables page for more information on configuring command tables.

Workflow Integration

System Commands

System commands are commands executed through Workflows at the system level. For more information about Workflows, see the Workflows section.

Display on Monitor

Displays a camera's video stream on a monitor.

Table 1. Parameters
Camera Id	The identifier of a camera entity.
Monitor Number	The identifier for the monitor to display the video stream on.
Tile Number	The identifier of the tile on a monitor the video stream will be displayed on.

Go to Preset

Directs a camera to move to a predefined position.

Table 2. Parameters
Camera Id	The identifier of a camera entity.
Preset Id	The identifier of a predefined position.

Troubleshooting

Logs from the driver and Runtime can be viewed in the Debug Tools client. These messages contain information which can provide further context for issues during initialization, or while actively running. This can help diagnose problems.